Fluidyne Instruments Private Limited
Fluidyne Instruments Private Limited
Chembur, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Static Mixer Elements

Leading Exporter of fluidyne static mixer element types & design of static mixers, sms mixing element, smq mixing element, smv mixing element, smx-m multiple mixing elements and smx - standard mixing elements from Mumbai.

Fluidyne Static Mixer Element Types & Design of Static Mixers

Fluidyne Static Mixer Element Types & Design of Static Mixers
  • Fluidyne Static Mixer Element Types & Design of Static Mixers
Ask For Price
Product Price :Get Latest Price

Fluidyne® Static Mixer Element Types & Design of Static Mixers

Basic segment shapes of static mixers

Inside the FLUIDYNE static mixer design  basic segment shapes are used; the S-shape or Screw/Spiral/Helical shape, the X-shape and Multiple X Shape. More segments form one strand of elements that are placed inside a tube or pipe. The attachment of the element strands can take place by means of high-quality argon welding. Elements can be dismantled easily. 

Characteristics of different elements

Each element has process specific characteristics and depending on the process and the flow diameter a certain type of element will be chosen. Below you will find a short explanation of the segment shapes. You can contact FLUIDYNE for more information about the segment shapes that have been used in the static mixers.

Request
Callback
Request for Quotation

SMS Mixing Element

SMS Mixing Element
  • SMS Mixing Element
Ask For Price
Product Price :Get Latest Price

SMS mixing element

·         Standard screw, helical or spiral shaped mixing element.

·         For static mixers with a diameter of up to maximum 160 mm

·         Suitable for basic mixing applications, liquids and gas.

·         Suitable for laminar flows

Request
Callback
Request for Quotation

SMQ Mixing Element

SMQ Mixing Element
  • SMQ Mixing Element
Ask For Price
Product Price :Get Latest Price

SMQ mixing element

·         Q- shaped mixing element design

·         Performances equal to PMS

·         For static mixers with a diameter of approx. 160 mm to infinity

·         Suitable for basic mixing applications, liquids and gas.

Request
Callback
Request for Quotation

SMV Mixing Element

SMV Mixing Element
  • SMV Mixing Element
Ask For Price
Product Price :Get Latest Price

 

 

SMV mixing element

·         V shaped mixing element design

·         For static mixers with a diameter of approx. 50 mm to infinity

·         Very suitable for mixing gases or with large contact surface, mostly suitable for gas, but also for liquids

·         Suitable for large tube diameters

·         Suitable for short mixing lengths

·         Minimal space required for mixing or dispersion

·         Quick mass transfer through continuous renewal of the interfaces.

 

Elements provide turbulent or laminar mixing

Depending on the element chosen, mixing can be divided into turbulent and laminar. In case of turbulent mixing we are talking about mixing substances where the viscosity is watery or slightly higher. The flow speeds are relatively high. Radial mixing occurs relatively often, and a technical homogeneous mixture has already been obtained in a short section . Laminar mixing occurs with substances with a high to very high viscosity. The  speeds are low and the pressure drops are high. Radial mixing hardly ever occurs. The mixing effects are concentrated around the transition of the mixing elements. There the two layers are forced to mix and then forced into each other so that four layers occur, and so on. At the menu item 'operating principle' you can read more about turbulent and laminar mixing.

Dosing Ports or Injectors

 

 

In processes in which the mixing ratios are wide apart from each other or in which physical material properties vary greatly, it is important to add the additive to the main flow via an injection unit. One possibility could be a centre line injection, but also injectors in the shape of a clarinet are interesting; the many possibilities can also be supplied as a demountable version . The advantage of an injector is that the additive is injected into the main flow at an ideal point, before the first mixing element, so that the mixing action takes place significantly more efficiently. FLUIDYNE can advise you in choosing the most ideal version for your application.

 

 

Request
Callback
Request for Quotation

SMX-M Multiple Mixing Elements

SMX-M Multiple Mixing Elements
  • SMX-M Multiple Mixing Elements
Ask For Price
Product Price :Get Latest Price

SMX-M  multiple mixing elements

·         X-crossed type mixing element design

·         Suitable for short mixing lengths

·         Suitable for static mixers of all sizes

·         Relative high pressure drop and not totally free from blind spots

·         Very suitable for high viscosity mixing

·         Very good mixing and dispersion – for a very wide range of viscosity

·         Reduction of product degradation

·         Provides for a compact design of the static mixer

·         Suitable for the mixing of sensitive products, with minimal friction tension

·         No deposits or accumulation of materials because of cross mixing.

Request
Callback
Request for Quotation

SMX - Standard Mixing Elements

SMX - Standard Mixing Elements
  • SMX - Standard Mixing Elements
Ask For Price
Product Price :Get Latest Price

SMX - standard mixing elements

·         Standard X-crossed type mixing element design

·         Suitable for short mixing lengths

·         Suitable for turbulent flow

·         Suitable for static mixers of all sizes

·         Relative high pressure drop and not totally free from blind spots

·         Very suitable for high viscosity mixing

·         Very good mixing and dispersion – for a very wide range of viscosity

·         Reduction of product degradation

·         Suitable for the mixing of sensitive products, with minimal friction tension

·         No deposits or accumulation of materials because of cross mixing.

Request
Callback
Request for Quotation
X

Explore more products



Reach Us
K Sampath (Director)
70-D/3, Uday Building, Central Avenue Road Chembur East
Mumbai- 400071, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS