FLUIDYNE CO2 Absorbers' clean and absorb CO2 from incoming air. FLUIDYNE CO2 Absorbers are rugged in construction made of impact resistant Plexiglas, Die Cast Aluminium, Stainless Steel, Plastics and Carbon steel. CO2 media is inert, non toxic and non corrosive and contains microscopic pores that absorb CO2. When CO2 Absorber gathers maximum CO2 and it changes color when it is time to replace the media. Industry spends millions annually treating the negative effects of contamination caused by CO2. This causes contamination of tank contents, DM Water, lubricants and hydraulic fluids resulting in loss, production downtime, repair costs, etc. FLUIDYNE CO2 Absorbers are the perfect solution for high CO2 contents in environments. To extend the Inspection window is provided to check the media and do the needful replacement when there is change of colour of media.
FLUIDYNE CO2 Absorbers are made from Carbon or Stainless Steel, PVC, UPVC , Polypropylene , Polyurethane, , fiberglass, Micro glass, Polycarbonate, Plexiglas housing. UV Proof Powder Coated External Finish is also available.
CO2 Absorber media Removing & Refilling method is specially designed to avoid skilled labour requirement at site and consequent air leakage.
FLUIDYNE CO2 Absorbers are used in DM Water, Transformers, Hydraulic Reservoirs, Bulk Oil Storage, Diesel storage, Chemical Tanks and harsh environments.
FLUIDYNE design and manufacture CO2 scrubbers / CO2 Tank Breather Filters for the removal of CO2 from the airflow during emptying of storage tanks. Carbon Dioxide Removal System for Demineralised Water Tanks prevents penetrating of carbon dioxide (CO2) by removing it from supply air. CO2 Scrubber / CO2 Tank Breather Filter is mounted on the respiratory valve of the tank. It can be assembled either on the top of the tank or on the ground. The CO2 filtration efficiency up to 100% enables a high quality of demineralised water. Advantages of FLUIDYNE CO2 scrubbers / CO2 Tank Breather Filters water tanks CO2 scrubbers / CO2 Tank Breather Filters is the ease of maintenance and efficiency of operation. High quality of demineralised water is important for such industries as power generation, semiconductor and pharmaceutical where there are strict regulatory requirements. The most common way to measure very low levels of ionic impurities in ultra pure water is on line analysis of conductivity and resistivity. Demineralised water is often exposed to CO2 from the air, which increases its conductivity and gives the appearance of a contaminant in the water. Depending on CO2 concentration in incoming air water conductivity can be increased to ~0.8-1.5 S/cm. CO2 Scrubber for DM Tanks allows you to keep stable pH and low conductivity of demineralised water. Purpose is to Prevent Carbon Dioxide from entering into process water storage tanks Water storage tanks and Condensate Storage tanks. The Design is basically customized equipment reflecting customer requirements.
Housing CS FRP, Stainless Steel Grade etc
Sight Glass Borosilicate / Polycarbonate
Absorbent(Indicator) Minimized resistance to gas flow
Installation Top mounting / Ground mounting/ In-Line.
Fluidyne Activated Carbon absorbers use granular activated carbon (GAC) for removing organic constituents and residual disinfectants in water supplies. This not only improves taste and minimizes health hazards; it protects other water treatment units such as reverse osmosis membranes and ion exchange resins from possible damage due to oxidation or organic fouling. Most activated carbons are made from raw materials such as nutshells, wood, coal and petroleum. Different raw materials produce different types of activated carbon varying in hardness, density, pore and particle sizes, surface areas, and ph. The two principal mechanisms by which activated carbon removes contaminants from water are adsorption and catalytic reduction. Organics are removed by adsorption and residual disinfectants are removed by catalytic reduction. This is usually the case anyway since activated carbon is often used upstream of ion exchange or membranes to remove chlorine. Activated carbon can remove and destroy residual disinfectants (chlorine and chloramines) through a catalytic reduction reaction. Activated carbon absorbers are filters and need to be backwashed periodically.
FLUIDYNE Silica Gel Breathers or Desiccants' clean and dry the incoming air. Expelled air partially regenerates the silica gel and back flushes the breather extending the life of the breather. FLUIDYNE Breathers are rugged in construction made of impact resistant Plexiglas, Die Cast Aluminum, Stainless Steel, Plastics and Carbon steel. Silica gel is inert, non toxic and non corrosive and contains microscopic pores that absorb moisture up to 40% to 45 % of its weight (Silica gel as hydrophilic agent.). When silica gel gathers maximum moisture it changes color when it is time to replace or regenerate the silica gel. Industry spends millions annually treating the negative effects of contamination caused by wet, dirty air. This causes contamination of tank contents, lubricants and hydraulic fluids resulting in loss, excess machine wear, production downtime, repair costs, etc. FLUIDYNR Breathers are the perfect solution for high humidity and high dust environments. To extend the desiccant's life a special design incorporates two check valves or inlet oil seal arrangement. The check valves provide a closed system until airflow is required, extending the service life of the desiccant. Specifically, the intake check valve allows airflow into the breather only when differential pressure between the atmosphere and fluid reservoir exceeds a 0.1 psi threshold, while the exhaust check valve permits air to exit the reservoir when the differential pressure exceeds a 2.0 psi threshold. A 0.1 psi check valve is also available for exhaust.
- FLUIDYNE Breathers are made from Carbon or Stainless Steel, PVC, UPVC , Polypropylene , Polyurethane, , fiberglass, Micro glass, Polycarbonate, Plexiglas housing. UV Proof Powder Coated External Finish is also available.
- Gel Removing & Refilling method is specially designed to avoid skilled labour requirement at site and consequent air leakage.
- FLUIDYNE Breathers are used in DM Water, Transformers, Hydraulic Reservoirs, Bulk Oil Storage, Diesel storage, Chemical Tanks and harsh environments.